Inert Gas Compressor (Tanker)
critical
IMO Required
3 Modelle gesamt
IG system compressor for tanker cargo tank inerting
4000h
Service Interval
20 yr
Typical Lifetime
Typical Manufacturers
Atlas Copco
Hamworthy
Tanabe
3 Hersteller · 3 Modelle
🏭
Atlas Copco
1 ✓ 1 verifiziert⚙️
ZR 250
✓ verifiziert
Inspector
250 m3/h
· 55.0 kW
· Inert Gas (N2/CO2)
Common Failures:
- • Seal failure from corrosive gas
- • Intercooler corrosion
- • Bearing wear
Service: Oil-free type mandatory for IG service; corrosion-resistant materials.
Spares: Atlas Copco: Ventilsätze und Kolbenringe an Bord vorhalten. Lead time: 2-6 Wochen. Ölfilter und Dichtungssätze als Standard-Bordvorrat.
🏭
Tanabe
1 ✓ 1 verifiziert⚙️
VLH-54 IG
✓ verifiziert
Inspector
180 m3/h
· 37.0 kW
· Inert Gas (N2/CO2)
Common Failures:
- • Valve corrosion
- • Piston ring wear from acidic condensate
- • Cooler tube pitting
Service: Reciprocating IG compressor; drain condensate after every use.
Spares: Tanabe: Ventilsätze und Kolbenringe an Bord vorhalten. Lead time: 2-6 Wochen. Ölfilter und Dichtungssätze als Standard-Bordvorrat.
🏭
Wärtsilä
1 ✓ 1 verifiziert⚙️
IG-55
✓ verifiziert
Inspector
200 m3/h
· 45.0 kW
· Inert Gas (N2/CO2)
Common Failures:
- • Gas scrubber fouling
- • Deck seal water level loss
- • Compressor valve failure
Service: Part of IG plant; coordinate maintenance with scrubber and deck seal.
Spares: Hamworthy: Ventilsätze und Kolbenringe an Bord vorhalten. Lead time: 2-6 Wochen. Ölfilter und Dichtungssätze als Standard-Bordvorrat.