Screw Pump
medium
Positive displacement screw pumps for FO/LO transfer and supply
Known Models (5)
IMO AB ACG 052
50 m³/h @ 10 bar
· 15.0 kW
· Lube Oil
· Triple Screw
medium: Lube Oil
power_kw: 15
type: Triple Screw
Common Failures:
- • Screw wear from contaminated oil
- • Mechanical seal leakage
- • Relief valve sticking
- • Bearing failure from misalignment
Service: Check screw clearance at 8000 hrs. Replace mechanical seal every 16000 hrs. Monitor discharge pressure for wear indication.
Spares: IMO AB: Ersatzteile per Hersteller-Ersatzteilliste. Mechanische Dichtungen und Laufräder an Bord vorhalten. Lead time: 2-6 Wochen je nach Hersteller.
IMO AB ACE 032
32 m³/h @ 12 bar
· 11.0 kW
· Fuel Oil
· Triple Screw
medium: Fuel Oil
power_kw: 11
type: Triple Screw
Common Failures:
- • Screw scoring from fuel contamination
- • Seal leakage at high viscosity
- • Suction strainer clogging
Service: Pre-heat HFO to reduce viscosity. Clean suction strainer regularly. Relief valve set at 14 bar.
Spares: IMO AB: Ersatzteile per Hersteller-Ersatzteilliste. Mechanische Dichtungen und Laufräder an Bord vorhalten. Lead time: 2-6 Wochen je nach Hersteller.
IMO AB ACE 038
38 m³/h @ 8 bar
· 7.5 kW
· Fuel Oil
· Triple Screw
medium: Fuel Oil
power_kw: 7.5
type: Triple Screw
Common Failures:
- • Screw wear
- • Mechanical seal failure
- • Coupling misalignment
Service: Supply pump to purifier — maintain constant pressure. Check coupling alignment every 4000 hrs.
Spares: IMO AB: Ersatzteile per Hersteller-Ersatzteilliste. Mechanische Dichtungen und Laufräder an Bord vorhalten. Lead time: 2-6 Wochen je nach Hersteller.
Kracht KF-80
80 L/min @ 16 bar
· 5.5 kW
· Fuel Oil
· Gear Pump
medium: Fuel Oil
power_kw: 5.5
type: Gear Pump
Common Failures:
- • Gear tooth wear
- • Shaft seal leakage
- • Cavitation at high viscosity
- • Relief valve malfunction
Service: Replace shaft seals every 8000 hrs. Monitor flow rate for wear indication. Ensure adequate NPSH.
Spares: Kracht: Ersatzteile per Hersteller-Ersatzteilliste. Mechanische Dichtungen und Laufräder an Bord vorhalten. Lead time: 2-6 Wochen je nach Hersteller.
Kracht KF-150
150 L/min @ 10 bar
· 7.5 kW
· Lube Oil
· Gear Pump
medium: Lube Oil
power_kw: 7.5
type: Gear Pump
Common Failures:
- • Gear wear from contaminated oil
- • Bearing failure
- • Shaft seal leakage
Service: Use filtered oil. Shaft seal replacement every 12000 hrs. Check gear backlash at overhaul.
Spares: Kracht: Ersatzteile per Hersteller-Ersatzteilliste. Mechanische Dichtungen und Laufräder an Bord vorhalten. Lead time: 2-6 Wochen je nach Hersteller.