Auxiliary Cooling SW Pump
high
3 / 3 Modelle (Inspector)
Seawater cooling pump for auxiliary engines and systems
8000h
Service Interval
20 yr
Typical Lifetime
Typical Manufacturers
IMO
Azcue
Shinko
Iron Pump
3 Hersteller · 3 Modelle
🏭
Azcue
1 ✓ 1 verifiziert⚙️
AN 40-200
✓ verifiziert
Inspector
60 m3/h
· 7.5 kW
· Seawater
Common Failures:
- • Corrosion of wetted parts
- • Seal failure
- • Vibration from cavitation
Service: Bronze construction recommended; check suction pressure.
Spares: Azcue: Ersatzteile per Hersteller-Ersatzteilliste. Mechanische Dichtungen und Laufräder an Bord vorhalten. Lead time: 2-6 Wochen je nach Hersteller.
🏭
IMO
1 ✓ 1 verifiziert⚙️
ACE 025L3 NTBP
✓ verifiziert
Inspector
80 m3/h
· 11.0 kW
· Seawater
Common Failures:
- • Seal leakage
- • Impeller erosion
- • Bearing noise
Service: Same maintenance schedule as main SW pump; smaller capacity.
Spares: IMO: Ersatzteile per Hersteller-Ersatzteilliste. Mechanische Dichtungen und Laufräder an Bord vorhalten. Lead time: 2-6 Wochen je nach Hersteller.
🏭
Shinko
1 ✓ 1 verifiziert
GVD 200M
✓ verifiziert
Inspector
100 m3/h
· 15.0 kW
· Seawater
Common Failures:
- • Impeller wear
- • Shaft seal leak
- • Strainer blockage
Service: Standby pump should be tested weekly.
Spares: Shinko: Ersatzteile per Hersteller-Ersatzteilliste. Mechanische Dichtungen und Laufräder an Bord vorhalten. Lead time: 2-6 Wochen je nach Hersteller.